22 TCM load data
Could you add in 22 TCM?
44 Ansichten
top of page
XXL Website & Load Data
Öffentlich·21 Mitglieder
8mm lebel
Hello, i'm looking for data concerning 8mm lebel, .323 diameter in 196grains.
Thank you in advance
42 Ansichten
Reload data for Sako Blade .284 7mm bullet.
Dear XXLreloading Team,
Is it possible to add reload data for the Sako Blade 7 mm (.284) bullet 9,1 g/140 gr bullet?
In my case preferbly for the 7mm Rem Mag and 7x65R caliber but it would be great for all 7 mm calibers.
I attach pictures of the box, measures of boat tail end and boat tail length.
Maximum bullet length: 33,70 mm
Minimum bullet length: 33,64 mm
28 Ansichten
Max
vor 6 Tagen
•
Sure - here you go: https://www.xxlreloading.com/bullets/.284-%7C-140gr-%7C-sako-blade
44 spécial
please create dataload for 44 special (introduced by Smith & Wesson in 1907)
Sincerly yours👀
22 Ansichten
Load data for 9x25 Dillon
Hello.
I`d like to try out new Loads in 9x25 Dillon.
Now i am using VV 3N37 powder with .355 95gn oder 115gn Sierra bullets.
Any plans to add some in the future?
Kind regards and thanks in advance!
61 Ansichten
Max
vor 6 Tagen
•
Will have added 9x25 Dillon as caliber. Will go live soon. All suitable powders and bullets will have load data.
SAKO Bullet Blade for 30-06
Dear xxlreloading Team, can you add the SAKO 30 CAL Bullet Blade (11g/170gr) for loading in 30-06 to the Database? I did some measurements on the bullet length: Average: 73.05 mm Min: 73.00 mm
Max: 73.15 mm Attached a Picture of the Bullet Box. Thanks!
44 Ansichten
.375 H&H 220gr bullets?
Hello.
There are lots of bullet weights available in the load data for .375 H&H, but nothing at all for a 220gr bullet. I want to use a locally produced bullet here in South Africa from SUS-TAC (Bullet Specifications - https://sus-tac.co.za/index.php/bullet-specifications)
Also the .375 220gr bullets from Viper Bullets (another South African produced bullet - VERY well priced) at BC & Twist: Plains Supreme – Viper Bullets - https://www.viperbullets.com/bc-and-twist-plains-supreme/
Thanks and regards,
Des
25 Ansichten
Max
vor 6 Tagen
•
We will shortly add SUS-TAC bullets and load data where we have necessary specifications. Regarding Viper - they do not list critical information on their website such as length, length of boat tail, diameter at bullet bottom ... Please send me these specs of the bullets you want us to add and we give it a shot.
408 Chey tac Is there any load data for 408 Chey tac on this site if not is there any coming
22 Ansichten
would be nice to see loads with Hornady Superformance, in .243 win and others
13 Ansichten
Max
vor 6 Tagen
•
We are not aware that Hornady is selling its Superperformance powder. We assume you mean Hodgdon Superperformance Powder which is (as far as we understand) used for Hornady's Superperformance Ammunition. This powder is available already if you use the personalized load calculator.
6.5prc
Would like to have a 6.5 prc that would shoot a 142 grain bullet 4000fps
20 Ansichten
Max
vor 6 Tagen
•
The way you can check if this is feasable is as follows:
go to the respective caliber page - here: https://www.xxlreloading.com/calibers/6.5-prc
See if there is a bullet in your desired weight available. In your case it is not. So you can choose the next closest - here 143g or 140g
We have chosen for this illustration the Hornady 143g ELD-X: https://www.xxlreloading.com/load-data/6.5-prc/.264-%7C-143gr-%7C-hornady-eld-x
The load table gives you the velocitis for the max load. They include in our standard settings a safety buffer of 10% vs. the maximum allowed pressure for this caliber.
The fastest velocity with this buffer is Alliant Reloder 25 with 3156fps
Now you can - at own risk - open the "PErsonalized Load Calculator" tab and put the safety buffer to 0. This shows you that Accurate MagPro would give you 3199 fps at a 23.6'' barrel length.
Load data
Why no load data for Hodgon superformance or Ramshot big game
146 Ansichten
338 Lapua Berger
Hello looking to see if its possible to get load data using US869 for 338 lapua 250g berger hybrid OTM tactical ! Thanks
I have some load data for it but you guys have better data as to pressures and all that thanks
25 Ansichten
schwob2
vor 6 Tagen
•
Thanks to the support of the community we have been able to calibrate our powder model for Hodgdon US 869 and have added this powder: https://www.xxlreloading.com/powders/hodgdon--us-869
However, it does not meet the listing criteria for your desired caliber and bullet combination: https://www.xxlreloading.com/services-faq?questionId=dbd4f8b9-101e-4f50-9993-936cee30bf88&appDefId=14c92d28-031e-7910-c9a8-a670011e062d and is hende not listed in the standard loads: https://www.xxlreloading.com/load-data/.338-lapua-mag./.338-%7C-250gr-%7C-berger-hybrid-otm-tactical
The propellant combustion is below 90%, actually 78%. You can see if you use the personalized load calculator for this powder / caliber combination: https://www.xxlreloading.com/services-faq?questionId=9ca693aa-8929-48cb-89f2-50031f3c83a8&appDefId=14c92d28-031e-7910-c9a8-a670011e062d as this shows also loads with lower propellant combustion.
Hope this helps!
Sako bullets. Especially Blade
Interesti calibers for me would be 6.5 CM and 6.5x57R
44 Ansichten
Max
vor 6 Tagen
•
We have added the bullet and load data for it:
https://www.xxlreloading.com/bullets/.264-%7C-120gr-%7C-sako-blade
We hope it serves what you are looking for.
Please leave feedback here if you like our service: https://www.xxlreloading.com/testimonials
Thanks
6.5 creedmore
40 Ansichten
xxlreloading.com
vor 6 Tagen
Please see here - we added the bullet and load data for it: https://www.xxlreloading.com/bullets/.264-%7C-153.5gr-%7C-berger-lrht
Please leave a comment here if you like our service :-) https://www.xxlreloading.com/testimonials
Mitglieder
- guhndawg
bertramlife bertramlifeddavey68 ddavey68dgp3006 dgp30067mmnail 7mmnail
bottom of page
Thank you!!