These powders are used by Hornady in their 30-30 and 32 Win Special loads. Would really like to see them appear when load data is pulled up. The LeveRevolution power is special allowing to push the bullet faster but remain within pressure limits.
I tried adjusting Z and SD but they don’t show up.
We are not Hornady. We have our own quality standards and list powders in our default load data only if they fulfill our quality standards: https://www.xxlreloading.com/services-faq?questionId=dbd4f8b9-101e-4f50-9993-936cee30bf88&appDefId=14c92d28-031e-7910-c9a8-a670011e062d
The listed powders (IMR4064, IMR4895, and LeveRevolution) are fast-burning. Hence, you can not use too much powder. In these cases, the max load only fills the case to less than 80%. If you use more, you exceed the max. pressure. However, with less than 80% fill rate we do not consider loads "qualitative" and do not show them in our standard load data.
Accuracy is typically not satisfying with Fill Rates below 80%. Also, if the Fill Rate reduces too much you get possible problems with powder ignition and might want to use filler material.
IMPORTANT: To allow you to see more powders and to validate what we a re saying, we have added a new field to the "personalized load calculator'" which allows you to set the minimum Fill Rate as low as 60%. Hope this helps!