top of page

Load data for:

.218 Bee || .224 | 40gr | Nosler Varmageddon HPFB

You need to be a member to bookmark a  load - more info here!

Load data for caliber  .218 Bee with .224 | 40gr | Nosler Varmageddon HPFBundefined

Technical Specifications

Bullet:
.224 | 40gr | Nosler Varmageddon HPFB
Bullet Weight:
40gr | 2.6g
Bullet Diameter:
0.224" | 5.69mm
Bullet Length:
0.565" | 14.4mm
Caliber:
.218 Bee
Case Length (l3):
1.345" | 34.2mm
Cartridge Length (C.O.L.):
1.655" | 42.0mm
Seated Depth:
0.255" | 6.5mm
Shank Seated Depth:
0.255" | 6.5mm
Case Capacity:
18.0 Grains of Water | 1.17 cm3
Max. allowed Pressure:
46412 psi | 3200 bar
Primer Size:
Small Rifle (SR)
LID:
LID_B3953_C53
All load data for bullet manufacturer Nosler

Load data for 16 loads in caliber .218 Bee with .224 | 40gr | Nosler Varmageddon HPFB bullet including underlying parameters such as bullet length, cartridge length, and case capacity. The loads are based on a cartridge with a case capacity of 18 Grains of Water and a seated depth of 0.26" / 6.5 mm and a Small Rifle (SR) primer. NOTICE: Use the "Personalized Load Calculator" to adjust to your own specifications.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

  • Applied measure system: imperial .You can change setting in your account > Profile > Bottom of Page

    • a load must fulfill certain criteria to be listed below - see here.

    • our load data might deviate from other sources - see most common reasons here

    • all loads are based on the bullet and case dimensions shown further below - see here what to do if you deviate.

    • you can set your own specifications in the "Personalized Load Calculator"

    • Go to "My Account " bottom of the page to define the measure system (imperial vs. metric) 

  • No data yet

  • .

You can add a specific load / powder from below to your Diary and manage there. 

select powder first

>> add to My Diary

you have over 25 entries already. Go to your Diary and delete some to add new ones.

added successfully

>> go to Diary

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
[locked]
93%
41176
89%
2844
96%
[Accurate No. 11 FS]*
[locked]
91%
40538
87%
2907
93%
Hodgdon Lil'Gun
[locked]
89%
40263
87%
3054
100%
Hodgdon TrailBoss
[locked]
96%
23119
50%
1841
100%
Lovex S040
[locked]
86%
41234
89%
2894
99%
[Lovex S053]*
[locked]
98%
33185
72%
2789
93%
SNPE Vectan BA6 1/2
[locked]
98%
31038
67%
2680
99%
Vihtavuori N110
[locked]
97%
39189
84%
2933
99%
Max Load - Barrel Length: 23.6" | 60.0cm
Powder
Charge
FR
MaxP
%
V(0)
z
[ADI AR 2205]*
[locked]
81%
28166
61%
2530
90%
[Accurate No. 11 FS]*
[locked]
86%
33678
73%
2759
90%
Hodgdon Lil'Gun
[locked]
81%
30937
67%
2848
98%
Hodgdon TrailBoss
[locked]
80%
17709
38%
1680
100%
Lovex S040
[locked]
81%
35273
76%
2769
98%
[Lovex S053]*
[locked]
92%
27818
60%
2638
90%
[SNPE Vectan BA6 1/2]*
[locked]
80%
19653
42%
2313
94%
Vihtavuori N110
[locked]
80%
23641
51%
2530
95%
Start Load - Barrel Length: 23.6" | 60.0cm


FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feets per second (fps)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

bottom of page