Load data for:
.260 PICRA || .264 | 160gr | Sierra SP SemiSp
You need to be a member to bookmark a load - more info here!
Technical Specifications
Bullet: | .264 | 160gr | Sierra SP SemiSp |
Bullet Weight: | 160gr | 10.4g |
Bullet Diameter: | 0.264" | 6.71mm |
Bullet Length: | 1.250" | 31.7mm |
Caliber: | .260 PICRA |
Case Length (l3): | 1.515" | 38.5mm |
Cartridge Length (C.O.L.): | 2.404" | 61.1mm |
Seated Depth: | 0.361" | 9.2mm |
Shank Seated Depth: | 0.361" | 9.2mm |
Case Capacity: | 38.6 Grains of Water | 2.51 cm3 |
Max. Allowed Pressure: | 56565 psi | 3900 bar |
Primer Size: | Large Pistol (LP) |
LID: | LID_B5820_C251 |
Load data for 30 loads in caliber .260 PICRA with .264 | 160gr | Sierra SP SemiSp bullet including underlying parameters such as bullet length, cartridge length, and case capacity. The loads are based on a cartridge with a case capacity of 38.6 Grains of Water and a seated depth of 0.36" / 9.2 mm and a Large Pistol (LP) primer. NOTICE: Use the "Personalized Load Calculator" to adjust to your own specifications.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.
Questions regarding the load data: Please read the information in the next tab "Explanations".
a load must fulfill certain criteria to be listed below - see here.
our load data might deviate from other sources - see most common reasons here.
all loads are based on the bullet and case dimensions shown further below - see here what to do if you deviate.
you can set your own specifications in the "Personalized Load Calculator"
Go to "My Account " bottom of the page to define the measure system (imperial vs. metric)
Applied measure system: imperial
No data yet
.
You can add a specific load / powder from below to your Diary and manage there.
Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
ADI AP 100 | [locked] | 64% | 49240 | 87% | 1276 | 100% |
ADI AS 30 | [locked] | 68% | 50836 | 90% | 1175 | 100% |
Accurate Solo 1000 | [locked] | 65% | 50096 | 89% | 1181 | 100% |
Accurate Solo 1250 | [locked] | 62% | 50662 | 90% | 1198 | 100% |
Baschieri & Pellagri 100 | [locked] | 62% | 50444 | 89% | 1168 | 100% |
Hodgdon Clays | [locked] | 72% | 50836 | 90% | 1158 | 100% |
Maxam CSB 1 | [locked] | 65% | 50140 | 89% | 1194 | 100% |
Maxam CSB 3 | [locked] | 63% | 49617 | 88% | 1184 | 100% |
Maxam CSB 4 | [locked] | 63% | 49371 | 87% | 1168 | 100% |
Maxam CSB 5 | [locked] | 63% | 49327 | 87% | 1158 | 100% |
ReloadSwiss RS 30 | [locked] | 71% | 50256 | 89% | 1407 | 100% |
Rottweil P 805 | [locked] | 73% | 50488 | 89% | 1165 | 100% |
SNPE Vectan BA10 | [locked] | 67% | 49501 | 88% | 1152 | 100% |
Somchem S265 | [locked] | 69% | 49559 | 88% | 1385 | 100% |
Vihtavuori N32C Tin Star | [locked] | 85% | 49501 | 88% | 1132 | 100% |
Max Load - Barrel Length: 5.5" | 14.0cm
Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
ADI AP 100 | [locked] | 61% | 45701 | 81% | 1243 | 100% |
ADI AS 30 | [locked] | 61% | 43439 | 77% | 1096 | 100% |
Accurate Solo 1000 | [locked] | 61% | 46383 | 82% | 1142 | 100% |
Accurate Solo 1250 | [locked] | 61% | 48646 | 86% | 1175 | 100% |
Baschieri & Pellagri 100 | [locked] | 61% | 48515 | 86% | 1158 | 100% |
Hodgdon Clays | [locked] | 61% | 41582 | 74% | 1066 | 100% |
Maxam CSB 1 | [locked] | 61% | 46412 | 82% | 1152 | 100% |
Maxam CSB 3 | [locked] | 61% | 47776 | 84% | 1161 | 100% |
Maxam CSB 4 | [locked] | 61% | 47355 | 84% | 1148 | 100% |
Maxam CSB 5 | [locked] | 61% | 47529 | 84% | 1138 | 100% |
ReloadSwiss RS 30 | [locked] | 61% | 36608 | 65% | 1257 | 100% |
Rottweil P 805 | [locked] | 61% | 39943 | 71% | 1050 | 100% |
SNPE Vectan BA10 | [locked] | 61% | 44251 | 78% | 1102 | 100% |
Somchem S265 | [locked] | 61% | 39450 | 70% | 1276 | 99% |
Vihtavuori N32C Tin Star | [locked] | 61% | 31502 | 56% | 938 | 100% |
Start Load - Barrel Length: 5.5" | 14.0cm
FR ... fill rate of the cartridge in percent
MaxP ... max. pressure of load in psi
% ... max. pressure of load in percent of the maximum allowed pressure for this caliber
V(0) ... muzzle velocity in feets per second (fps)
z ... powder burnt in percent
[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.
[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.