top of page

Load data for:

.30 R Blaser || .308 | 165gr | Hornady InterBond

You need to be a member to bookmark a  load - more info here!

Load data for caliber  .30 R Blaser with .308 | 165gr | Hornady InterBondundefined

Technical Specifications

Bullet:
.308 | 165gr | Hornady InterBond
Bullet Weight:
165gr | 10.7g
Bullet Diameter:
0.308" | 7.82mm
Bullet Length:
1.300" | 33.0mm
Caliber:
.30 R Blaser
Case Length (l3):
2.677" | 68.0mm
Cartridge Length (C.O.L.):
3.536" | 89.8mm
Seated Depth:
0.441" | 11.2mm
Shank Seated Depth:
0.241" | 6.1mm
Case Capacity:
75.0 Grains of Water | 4.87 cm3
Primer Size:
Large Rifle (LR)
LID:
LID_B2681_C312
All load data for bullet manufacturer Hornady

Load  description

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    • a load must fulfill certain criteria to be listed below - see here.

    • our load data might deviate from other sources - see most common reasons here

    • all loads are based on the bullet and case dimensions shown further below - see here what to do if you deviate.

    • you can set your own specifications in the "Personalized Load Calculator"

    • Go to "My Account " bottom of the page to define the measure system (imperial vs. metric) 

  • No data yet

  • .

  • You can add a specific load / powder to your Diary. You can add a weapon and/or edit the entry any time. Select the specific powder to proceed. 

    select powder first

    >> add to My Diary

    you have over 25 entries already. Go to your Diary and delete some to add new ones.

    added successfully

    >> go to Diary

Applied measure system: imperial .You can change setting in your account > Profile > Bottom of Page

Powder
Charge
FR
MaxP
%
V(0)
z
Max Load - Barrel Length: 23.6" | 60.0cm
Powder
Charge
FR
MaxP
%
V(0)
z
Start Load - Barrel Length: 23.6" | 60.0cm


FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feets per second (fps)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

bottom of page