top of page

Load data for:

.300 Rem. SA Ultra Mag || .308 | 168gr | MEN HPBT Match

You need to be a member to bookmark a  load - more info here!

Load data for caliber  .300 Rem. SA Ultra Mag with .308 | 168gr | MEN HPBT Matchundefined

Technical Specifications

Bullet:
.308 | 168gr | MEN HPBT Match
Bullet Weight:
168gr | 10.9g
Bullet Diameter:
0.308" | 7.82mm
Bullet Length:
1.000" | 25.4mm
Caliber:
.300 Rem. SA Ultra Mag
Case Length (l3):
2.003" | 50.9mm
Cartridge Length (C.O.L.):
2.783" | 70.7mm
Seated Depth:
0.220" | 5.6mm
Shank Seated Depth:
0.220" | 5.6mm
Case Capacity:
74.0 Grains of Water | 4.80 cm3
Max. Allowed Pressure:
64107 psi | 4420 bar
Primer Size:
Large Rifle (LR)
LID:
LID_B3783_C373
All load data for bullet manufacturer MEN

Load  description

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • a load must fulfill certain criteria to be listed below - see here.

    • our load data might deviate from other sources - see most common reasons here

    • all loads are based on the bullet and case dimensions shown further below - see here what to do if you deviate.

    • you can set your own specifications in the "Personalized Load Calculator"

    • Go to "My Account " bottom of the page to define the measure system (imperial vs. metric) 

    Applied measure system: imperial

  • No data yet

  • .

You can add a specific load / powder from below to your Diary and manage there. 

Powder
Charge
FR
MaxP
%
V(0)
z
Max Load - Barrel Length: 23.6" | 60.0cm
Powder
Charge
FR
MaxP
%
V(0)
z
Start Load - Barrel Length: 23.6" | 60.0cm


FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feets per second (fps)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

bottom of page