top of page

Load data for 6 x 70 R + .243 | 105gr | Geco SOFTPOINT

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s): none

6 x 70 R + .243 | 105gr | Geco SOFTPOINT

Load Specifications

Geco Load Data | xxlreloading.com

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 32 loads in caliber 6 x 70 R with a .243 | 105gr | Geco SOFTPOINT bullet based on the specified parameters like bullet length, cartridge length, and case capacity as shown above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • a load must fulfill certain criteria to be listed below - see here.

    • our load data might deviate from other sources - see most common reasons here

    • all loads are based on the bullet and case dimensions shown further below - see here what to do if you deviate.

    • you can set your own specifications in the "Personalized Load Calculator"

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
Accurate 4350
89%
88%
94%
Alliant Reloder-16
88%
88%
93%
Alliant Reloder-17
85%
89%
96%
Alliant Reloder-23
97%
82%
94%
Hodgdon Hybrid 100V
91%
89%
96%
Hodgdon LVR
85%
88%
92%
IMR 4831
93%
88%
94%
Norma URP
88%
88%
93%
ReloadSwiss RS 60
86%
90%
97%
ReloadSwiss RS 62
89%
90%
93%
Somchem S365
92%
88%
97%
Vihtavuori N150
87%
90%
98%
Vihtavuori N160
86%
89%
93%
Vihtavuori N550
85%
89%
93%
Vihtavuori N555
96%
86%
94%
Winchester 6.5 StaBALL
86%
89%
96%

Max Load - Barrel Length: 

Powder
Charge
FR
MaxP
%
V(0)
z
Accurate 4350
83%
72%
90%
Alliant Reloder-16
83%
76%
90%
Alliant Reloder-17
81%
79%
93%
Alliant Reloder-23
91%
69%
90%
Hodgdon Hybrid 100V
81%
65%
90%
Hodgdon LVR
82%
80%
90%
IMR 4831
87%
73%
91%
Norma URP
83%
75%
90%
ReloadSwiss RS 60
81%
77%
94%
ReloadSwiss RS 62
85%
77%
90%
Somchem S365
81%
63%
91%
Vihtavuori N150
81%
74%
95%
Vihtavuori N160
81%
77%
91%
Vihtavuori N550
81%
77%
91%
Vihtavuori N555
90%
70%
90%
Winchester 6.5 StaBALL
81%
75%
93%

Start Load - Barrel Length: 

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page