top of page

Load data for 7.62 x 39 (.308) Russ. + .308 | 130gr | Ferrobull Tripple Expand Jagd

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s): ADI AR 2207, IMR 4227, Lovex S053, ReloadSwiss RS 36

7.62 x 39 (.308) Russ. + .308 | 130gr | Ferrobull Tripple Expand Jagd

Load Specifications

Ferrobull Load Data | xxlreloading.com

Load data for 40 loads in caliber 7.62 x 39 (.308) Russ. with .308 | 130gr | Ferrobull Tripple Expand Jagd bullet and 20 powders such as ADI AR 2207, IMR 4227, Lovex S053, ReloadSwiss RS 36. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • a load must fulfill certain criteria to be listed below - see here.

    • our load data might deviate from other sources - see most common reasons here

    • all loads are based on the bullet and case dimensions shown further below - see here what to do if you deviate.

    • you can set your own specifications in the "Personalized Load Calculator"

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. More details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads

    Relax this criteria at own risk to also potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z

Max Load - Barrel Length: 23.62" | 60.0cm

Powder
Charge
FR
MaxP
%
V(0)
z

Start Load - Barrel Length: 23.62" | 60.0cm

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
86%
88%
100%
ADI AR 2207
96%
75%
99%
Accurate 1680
91%
90%
95%
Accurate 5744
83%
88%
98%
Accurate No. 11 FS
84%
89%
100%
Alliant Reloder-10x
96%
60%
93%
Alliant Reloder-7
96%
80%
97%
Baschieri & Pellagri 106
97%
74%
92%
Hodgdon H4198
96%
80%
92%
IMR 4198
97%
71%
96%
IMR 4227
93%
89%
99%
Lovex D060
86%
89%
98%
Lovex S053
94%
87%
100%
Norma 200
97%
69%
96%
ReloadSwiss RS 36
94%
88%
99%
SNPE Vectan BA6 1/2
96%
84%
100%
Shooters World Buffalo Rifle
86%
89%
98%
Vihtavuori N110
89%
90%
100%
Vihtavuori N120
96%
71%
100%
Vihtavuori N130
96%
59%
92%

Max Load - Barrel Length: 

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
81%
76%
100%
ADI AR 2207
81%
47%
95%
Accurate 1680
81%
64%
91%
Accurate 5744
81%
81%
97%
Accurate No. 11 FS
81%
83%
100%
Alliant Reloder-10x
90%
50%
90%
Alliant Reloder-7
81%
51%
91%
Baschieri & Pellagri 106
93%
67%
90%
Hodgdon H4198
92%
71%
90%
IMR 4198
84%
49%
90%
IMR 4227
81%
62%
96%
Lovex D060
81%
76%
97%
Lovex S053
81%
59%
99%
Norma 200
83%
46%
90%
ReloadSwiss RS 36
81%
58%
95%
SNPE Vectan BA6 1/2
81%
57%
100%
Shooters World Buffalo Rifle
81%
76%
97%
Vihtavuori N110
81%
70%
100%
Vihtavuori N120
81%
45%
95%
Vihtavuori N130
92%
53%
90%

Start Load - Barrel Length: 

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page